| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| SJ plan/template needed http://www-.luthiersforum.com/forum/viewtopic.php?f=10130&t=34572 |
Page 1 of 1 |
| Author: | Buddha [ Wed Dec 14, 2011 2:09 pm ] |
| Post subject: | SJ plan/template needed |
Hi everyone. I have searched every supplier on the web and I couldn't find a Super Jumbo plan to build my first one. Anyone can help me? Thank you so much. |
|
| Author: | cbrviking [ Wed Dec 14, 2011 2:29 pm ] |
| Post subject: | Re: SJ plan/template needed |
http://www.guitarplansunlimited.com/J200.htm |
|
| Author: | Buddha [ Thu Dec 15, 2011 3:57 am ] |
| Post subject: | Re: SJ plan/template needed |
You think it´s similar to this one? http://www.kingslightguitars.com/K38%20superjumbo.htm This is the Super Jumbo contour I´m looking for... |
|
| Author: | Rod True [ Thu Dec 15, 2011 4:58 pm ] |
| Post subject: | Re: SJ plan/template needed |
If John Kingslight's shape is what you're after, why not email him and ask if he would be willing to send you a profile of it? Most builders will be happy to do this for you. As for the plans, you can just use the J-200 plans on the Kingslight shape will be fine assuming the profile dimentions are within 1/8" or so... If you need the plans, just make sure the bridge is layed out correctly for the scale you're going with, Then place the X-brace accordingly. |
|
| Author: | Buddha [ Thu Dec 15, 2011 6:54 pm ] |
| Post subject: | SJ plan/template needed |
Thank you! I'll follow your advices and see what happens! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|